Gnìomhadair niùmatach air a chleachdadh airson bhalbhaichean ball/bhalbhaichean dealan-dè
ACT201
Feartan
Sealladh farsaing air an toradh
Faodar an raon a dhealbhadh gus freagairt air an tagradh agad, le togail bodhaig, stuth, agus feartan taiceil air an leasachadh gus coinneachadh ri feumalachdan do phròiseis. Le teisteanas ISO 9001 againn, bidh sinn a’ cleachdadh dhòighean siostamach gus dèanamh cinnteach à càileachd àrd, agus faodaidh tu a bhith cinnteach à earbsachd agus coileanadh seulachaidh air leth tron bheatha dealbhaidh den mhaoin agad.
Riatanas Teicnigeach
· Is e siostam raca is pinion gnìomh dùbailte 90° no tilleadh earraich a th’ anns an actuator niùmatach alùmanum, a chaidh a dhealbhadh airson gnìomhachadh a h-uile seòrsa bhalbhaichean 1/4 tionndadh no tagraidhean 1/4 tionndadh.
Tha crìochnachadh sònraichte uachdar a-staigh a’ chuirp (Ra 0,4 – 0,6 um) còmhla ri cleachdadh padaichean an-aghaidh frithidh air an dèanamh ann an stuth le co-èifeachd frithidh glè ìosal (LAT LUB), air an cur suas anns na piostain, a’ cur casg air conaltradh meatailt ri meatailt.
Bidh beatha fhada agus gun chumail suas aig gnìomhaichean I-FLOW.
Sònrachadh
Frèam-uèir toraidh
Dàta Meudan
| Modail | FLANGE L (ISO5211) | R/R1 | A | B | C | D | E | F | G | H | I | J | K | O | P | S | T | U | V | W | X |
| C/C1 | M/N(mfn) | ||||||||||||||||||||
| AT-32 | FC3 | M5 | 116 | 51 | 23 | 29 | 70 | 45 | 30 | 80 | PF | M6 | 1/8” | 20 | 40 | 4 | 4 | 12 | 24 | 16 | 32 |
| φ36 | 10/9 | ||||||||||||||||||||
| AT-50 | F03/F05 | M5/M6 | 146 | 47 | 29 | 42 | 99 | 69 | 30 | 80 | PF | M6 | 1/8” | 20 | 40 | 4 | 4 | 12 | 24 | 16 | 32 |
| φ36/φ50 | 13/11 | ||||||||||||||||||||
| AT-63 | F03/F05 | M5/M6 | 163 | 59 | 36 | 48 | 115 | 85 | 30 | 80 | PF | M6 | 1/8” | 20 | 40 | 4 | 4 | 12 | 24 | 16 | 32 |
| φ36/φ50 | 16/14 | ||||||||||||||||||||
| AT-75 | F05/F07 | M6/M8 | 214 | 68 | 43 | 51 | 132 | 102 | 30 | 80 | PF | M6 | 1/8” | 20 | 40 | 4 | 4 | 12 | 24 | 16 | 32 |
| φ50/φ70 | 19/17 | ||||||||||||||||||||
| AT-88 | F05/F07 | M6/M8 | 252 | 68 | 50 | 56 | 145 | 115 | 30 | 80 | PF | M6 | 1/8” | 20 | 40 | 4 | 4 | 12 | 24 | 16 | 32 |
| φ50/φ70 | 20/17 | ||||||||||||||||||||
| AT-100 | F07/F10 | M8/M10 | 270 | 95 | 56 | 64 | 157 | 127 | 30 | 80 | PF | M6 | 1/4” | 20 | 40 | 4 | 4 | 12 | 24 | 16 | 32 |
| φ70/φ102 | 24/22 | ||||||||||||||||||||
| AT-115 | F07/F10 | M8/M10 | 316 | 97 | 65 | 75 | 185 | 145 | 30 | 80 | PF | M6 | 1/4” | 30 | 62 | 4 | 4 | 12 | 24 | 16 | 32 |
| φ70/φ102 | 24/22 | ||||||||||||||||||||
| AT-125 | F07/F10 | M8/M10 | 354 | 97 | 69 | 79 | 197 | 157 | 30 | 80 | PF | M6 | 1/4” | 30 | 62 | 4 | 4 | 12 | 24 | 16 | 32 |
| φ70/φ102 | 29/27 | ||||||||||||||||||||
| AT-145 | F10/F12 | M10/M12 | 418 | 115 | 80 | 87 | 218 | 178 | 30 | 80/130 | PF | M6 | 1/4” | 30 | 62 | 4 | 4 | 12 | 24 | 16 | 32 |
| φ102/φ125 | 30/27 | ||||||||||||||||||||
| AT-160 | F10/F12 | M10/M12 | 450 | 118 | 89 | 104 | 240 | 200 | 30 | 80/130 | PF | M6 | 1/4” | 30 | 80 | 4 | 4 | 12 | 24 | 16 | 32 |
| φ102/φ125 | 30/27 | ||||||||||||||||||||
| AT-190 | F10/F12 | M10/M12 | 518 | 139 | 103 | 105 | 272 | 232 | 30 | 80/130 | PF | M6 | 1/4” | 30 | 80 | 4 | 4 | 12 | 24 | 16 | 32 |
